/* Caprice32 - Amstrad CPC Emulator
   (c) Copyright 1997-2004 Ulrich Doewich

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/* Nec uPD765A Floppy Disk Controller emulation
   (c) Copyright 1997-2003 Ulrich Doewich

   Nov 08, 2000 - 18:02 started conversion of assembly FDC routines to C
   Nov 22, 2000 - 17:50 added fdc_read_status()
   Dec 19, 2000 - 00:05 added fdc_seek()
   Jan 15, 2001 - 16:52 fdc_read() done
   Jan 17, 2001 - 19:15 updated/fixed fdc_read(), fdc_readID, fdc_intstat; added fdc_recalib
   Jan 18, 2001 - 23:43 inlined cmd_read(); added #defines for loading the result buffer; added fdc_drvstat()
   Jan 24, 2001 - 22:26 fixed fdc_readID() (the result got overwritten by LOAD_RESULT_WITH_CHRN!)
   Aug 03, 2001 - 00:07 added fdc_write()
   Aug 04, 2001 - 10:40 added fdc_writeID()
   Oct 06, 2001 - 23:21 added fdc_readtrk()
   Oct 07, 2001 - 11:37 got fdc_readtrk() to work properly

   Jan 12, 2003 - 18:49 fdc_drvstat now reports an error condition when accessing side 2 on a one sided disk
   Jan 21, 2003 - 18:13 mod to fdc_drvstat was incorrect: drive falls back to 1st side on a single head drive
   Jan 25, 2003 - 15:57 data transfers can now time out and will be reported via OVERRUN condition
   Feb 05, 2003 - 19:42 changed the OVERRUN_TIMEOUT to 26µs as per NEC's documentation
   Feb 08, 2003 - 16:26 added a delay to fdc_read_status in execution phase: FDC first indicates busy before
                        starting data transfer ("Last Mission" loads)
   Feb 10, 2003 - 21:45 fixed cmd_read: multi-sector reads end on the first sector that is found to have the
                        opposite of the requested AM ("Nigel Mansell's Grand Prix" loads)
   Feb 11, 2003 - 18:35 increased OVERRUN_TIMEOUT again ("Puffy's Saga" loads)
   Mar 16, 2003 - 00:19 added the missing scan equal, scan low or equal and scan high or equal commands
   Mar 16, 2003 - 12:22 modified find_sector: if a sector cannot be found, table index should be 0
   Mar 16, 2003 - 16:12 fdc_seek now only changes track if the drive is ready (i.e. has a disk inserted)
   Mar 17, 2003 - 22:42 updated fdc_intstat to report status changes (drive ready/not ready)
   Mar 17, 2003 - 23:04 fixed fdc_drvstat: reset ready if motor is off or no disk inserted
   Mar 22, 2003 - 18:54 added support for the "flipped" disk condition
   Jun 03, 2003 - 18:34 fixed Bad Cylinder and No Cylinder handling when a sector cannot be found:
                        ("Starfox - CPM version" loads)
*/

#include "cap32.h"
#include "z80.h"

extern t_CPC CPC;
extern t_FDC FDC;
extern t_z80regs z80;

extern byte *pbGPBuffer;

#ifdef DEBUG_FDC
extern FILE *pfoDebug;
dword dwBytesTransferred = 0;
#endif

#define CMD_CODE  0
#define CMD_UNIT  1
#define CMD_C     2
#define CMD_H     3
#define CMD_R     4
#define CMD_N     5
#define CMD_EOT   6
#define CMD_GPL   7
#define CMD_DTL   8
#define CMD_STP   8

#define RES_ST0   0
#define RES_ST1   1
#define RES_ST2   2
#define RES_C     3
#define RES_H     4
#define RES_R     5
#define RES_N     6

#define OVERRUN_TIMEOUT 128*4
#define INITIAL_TIMEOUT OVERRUN_TIMEOUT*4

void fdc_specify(void);
void fdc_drvstat(void);
void fdc_recalib(void);
void fdc_intstat(void);
void fdc_seek(void);
void fdc_readtrk(void);
void fdc_write(void);
void fdc_read(void);
void fdc_write(void);
void fdc_readID(void);
void fdc_read(void);
void fdc_writeID(void);
void fdc_scan(void);
void fdc_scanlo(void);
void fdc_scanhi(void);

typedef struct fdc_cmd_table_def {
   int cmd;
   int cmd_length;
   int res_length;
   int cmd_direction;
   void (*cmd_handler)(void);
} fdc_cmd_table_def;

#define MAX_CMD_COUNT 15

fdc_cmd_table_def fdc_cmd_table[MAX_CMD_COUNT] = {
/* syntax is:
   command code, number of bytes for command, number of bytes for result, direction, pointer to command handler
*/
   {0x03, 3, 0, FDC_TO_CPU, fdc_specify}, // specify
   {0x04, 2, 1, FDC_TO_CPU, fdc_drvstat}, // sense device status
   {0x07, 2, 0, FDC_TO_CPU, fdc_recalib}, // recalibrate
   {0x08, 1, 2, FDC_TO_CPU, fdc_intstat}, // sense interrupt status
   {0x0f, 3, 0, FDC_TO_CPU, fdc_seek},    // seek
   {0x42, 9, 7, FDC_TO_CPU, fdc_readtrk}, // read diagnostic
   {0x45, 9, 7, CPU_TO_FDC, fdc_write},   // write data
   {0x46, 9, 7, FDC_TO_CPU, fdc_read},    // read data
   {0x49, 9, 7, CPU_TO_FDC, fdc_write},   // write deleted data
   {0x4a, 2, 7, FDC_TO_CPU, fdc_readID},  // read id
   {0x4c, 9, 7, FDC_TO_CPU, fdc_read},    // read deleted data
   {0x4d, 6, 7, CPU_TO_FDC, fdc_writeID}, // write id
   {0x51, 9, 7, CPU_TO_FDC, fdc_scan},    // scan equal
   {0x59, 9, 7, CPU_TO_FDC, fdc_scan},    // scan low or equal
   {0x5d, 9, 7, CPU_TO_FDC, fdc_scan},    // scan high or equal
};

extern t_drive driveA;
extern t_drive driveB;
t_drive *active_drive; // reference to the currently selected drive
t_track *active_track; // reference to the currently selected track, of the active_drive
dword read_status_delay = 0;



#define LOAD_RESULT_WITH_STATUS \
   FDC.result[RES_ST0] |= 0x40; /* AT */ \
   FDC.result[RES_ST1] |= 0x80; /* End of Cylinder */ \
   if (FDC.command[CMD_CODE] != 0x42) { /* continue only if not a read track command */ \
      if ((FDC.result[RES_ST1] & 0x7f) || (FDC.result[RES_ST2] & 0x7f)) { /* any 'error bits' set? */ \
         FDC.result[RES_ST1] &= 0x7f; /* mask out End of Cylinder */ \
         if ((FDC.result[RES_ST1] & 0x20) || (FDC.result[RES_ST2] & 0x20)) { /* DE and/or DD? */ \
            FDC.result[RES_ST2] &= 0xbf; /* mask out Control Mark */ \
         } \
         else if (FDC.result[RES_ST2] & 0x40) { /* Control Mark? */ \
            FDC.result[RES_ST0] &= 0x3f; /* mask out AT */ \
            FDC.result[RES_ST1] &= 0x7f; /* mask out End of Cylinder */ \
         } \
      } \
   }



#define LOAD_RESULT_WITH_CHRN \
   FDC.result[RES_C] = FDC.command[CMD_C]; /* load result with current CHRN values */ \
   FDC.result[RES_H] = FDC.command[CMD_H]; \
   FDC.result[RES_R] = FDC.command[CMD_R]; \
   FDC.result[RES_N] = FDC.command[CMD_N];



void check_unit(void)
{
   switch (FDC.command[CMD_UNIT] & 1) // check unit selection bits of active command
   {
      case 0: // target for command is drive A
         active_drive = &driveA;
         break;
      case 1: // target for command is drive B
         active_drive = &driveB;
         break;
   }
}



int init_status_regs(void)
{
   byte val;

   memset(&FDC.result, 0, sizeof(FDC.result)); // clear result codes buffer
   val = FDC.command[CMD_UNIT] & 7; // keep head and unit of command
   if ((active_drive->tracks == 0) || (!FDC.motor)) { // no DSK in the drive, or drive motor is turned off?
      val |= 0x48; // Abnormal Termination + Not Ready
   }
   FDC.result[RES_ST0] = val; // write ST0 to result codes buffer
   return (val & 8); // return value indicates whether drive is ready (0) or not (8)
}



t_sector *find_sector(byte *requested_CHRN)
{
   int loop_count;
   dword idx;
   t_sector *sector;

   sector = NULL; // return value indicates 'sector not found' by default
   loop_count = 0; // detection of index hole counter
   idx = active_drive->current_sector; // get the active sector index
   do {
      if (!(memcmp(&active_track->sector[idx].CHRN, requested_CHRN, 4))) { // sector matches requested ID?
         sector = &active_track->sector[idx]; // return value points to sector information
         if ((sector->flags[0] & 0x20) || (sector->flags[1] & 0x20)) { // any Data Errors?
            if (active_drive->random_DEs) { // simulate 'random' DEs?
               FDC.flags |= RNDDE_flag;
            }
         }
         FDC.result[RES_ST2] &= ~(0x02 | 0x10); // remove possible Bad Cylinder + No Cylinder flags
         break;
      }
      byte cylinder = active_track->sector[idx].CHRN[0]; // extract C
      if (cylinder == 0xff) {
         FDC.result[RES_ST2] |= 0x02; // Bad Cylinder
      }
      else if (cylinder != FDC.command[CMD_C]) { // does not match requested C?
         FDC.result[RES_ST2] |= 0x10; // No Cylinder
      }
      idx++; // increase sector table index
      if (idx >= active_track->sectors) { // index beyond number of sectors for this track?
         idx = 0; // reset index
         loop_count++; // increase 'index hole' count
      }
   } while (loop_count < 2); // loop until sector is found, or index hole has passed twice
   if (FDC.result[RES_ST2] & 0x02) { // Bad Cylinder set?
      FDC.result[RES_ST2] &= ~0x10; // remove possible No Cylinder flag
   }
   active_drive->current_sector = idx; // update sector table index for active drive
   return sector;
}



inline void cmd_write(void)
{
   t_sector *sector;

   sector = find_sector(&FDC.command[CMD_C]); // locate the requested sector on the current track
   if (sector) { // sector found
      int sector_size;

      sector->flags[0] = 0; // clear ST1 for this sector
      if (FDC.command[CMD_CODE] == 0x45) { // write data command?
         sector->flags[1] = 0; // clear ST2
      }
      else { // write deleted data
         sector->flags[1] = 0x40; // set Control Mark
      }

      if (FDC.command[CMD_N] == 0) { // use DTL for length?
         sector_size = FDC.command[CMD_DTL]; // size of sector is defined by DTL value
         if (sector_size > 0x80) {
            sector_size = 0x80; // max DTL value is 128
         }
      }
      else {
         sector_size = 128 << FDC.command[CMD_N]; // determine number of bytes from N value
      }
      FDC.buffer_count = sector_size; // init number of bytes to transfer
      FDC.buffer_ptr = sector->data; // pointer to sector data
      FDC.buffer_endptr = active_track->data + active_track->size; // pointer beyond end of track data
      FDC.timeout = INITIAL_TIMEOUT;
      read_status_delay = 1;
   }
   else { // sector not found
      FDC.result[RES_ST0] |= 0x40; // AT
      FDC.result[RES_ST1] |= 0x04; // No Data

      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



inline void cmd_read(void)
{
   t_sector *sector;

loop:
   sector = find_sector(&FDC.command[CMD_C]); // locate the requested sector on the current track
   if (sector) { // sector found
      FDC.result[RES_ST1] = sector->flags[0] & 0x25; // copy ST1 to result, ignoring unused bits
      FDC.result[RES_ST2] = sector->flags[1] & 0x61; // copy ST2 to result, ignoring unused bits
      if (FDC.command[CMD_CODE] == 0x4c) { // read deleted data command?
         FDC.result[RES_ST2] ^= 0x40; // invert Control Mark
      }
      if ((FDC.flags & SKIP_flag) && (FDC.result[RES_ST2] &= 0x40)) { // skip sector?
         if (FDC.command[CMD_R] != FDC.command[CMD_EOT]) { // continue looking?
            FDC.command[CMD_R]++; // advance to next sector
            goto loop;
         }
         else { // no data to transfer -> no execution phase
            LOAD_RESULT_WITH_STATUS

            LOAD_RESULT_WITH_CHRN

            FDC.phase = RESULT_PHASE; // switch to result phase
         }
      }
      else { // sector data is to be transferred
         int sector_size;

         if (FDC.result[RES_ST2] &= 0x40) { // does the sector have an AM opposite of what we want?
            FDC.command[CMD_EOT] = FDC.command[CMD_R]; // execution ends on this sector
         }
         if (FDC.command[CMD_N] == 0) { // use DTL for length?
            sector_size = FDC.command[CMD_DTL]; // size of sector is defined by DTL value
            if (sector_size > 0x80) {
               sector_size = 0x80; // max DTL value is 128
            }
         }
         else {
            sector_size = 128 << FDC.command[CMD_N]; // determine number of bytes from N value
         }
         FDC.buffer_count = sector_size; // init number of bytes to transfer
         FDC.buffer_ptr = sector->data; // pointer to sector data
         FDC.buffer_endptr = active_track->data + active_track->size; // pointer beyond end of track data
         FDC.timeout = INITIAL_TIMEOUT;
         read_status_delay = 1;
      }
   }
   else { // sector not found
      FDC.result[RES_ST0] |= 0x40; // AT
      FDC.result[RES_ST1] |= 0x04; // No Data

      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



inline void cmd_readtrk(void)
{
   int sector_size;
   t_sector *sector;

   sector = &active_track->sector[active_drive->current_sector];
   if (memcmp(&sector->CHRN, &FDC.command[CMD_C], 4)) { // sector does not match requested ID?
      FDC.result[RES_ST1] |= 0x04; // No Data
   }
   FDC.result[RES_ST2] &= 0xbf; // clear Control Mark, if it was set
   FDC.result[RES_ST1] |= sector->flags[0] & 0x25; // copy ST1 to result, ignoring unused bits
   FDC.result[RES_ST2] |= sector->flags[1] & 0x61; // copy ST2 to result, ignoring unused bits
   if (FDC.command[CMD_N] == 0) { // use DTL for length?
      sector_size = FDC.command[CMD_DTL]; // size of sector is defined by DTL value
      if (sector_size > 0x80) {
         sector_size = 0x80; // max DTL value is 128
      }
   }
   else {
      sector_size = 128 << FDC.command[CMD_N]; // determine number of bytes from N value
   }
   FDC.buffer_count = sector_size; // init number of bytes to transfer
   FDC.buffer_ptr = sector->data; // pointer to sector data
   FDC.buffer_endptr = active_track->data + active_track->size; // pointer beyond end of track data
   FDC.timeout = INITIAL_TIMEOUT;
   read_status_delay = 1;
}



inline void cmd_scan(void)
{
   t_sector *sector;

loop:
   sector = find_sector(&FDC.command[CMD_C]); // locate the requested sector on the current track
   if (sector) { // sector found
      FDC.result[RES_ST1] = sector->flags[0] & 0x25; // copy ST1 to result, ignoring unused bits
      FDC.result[RES_ST2] = sector->flags[1] & 0x61; // copy ST2 to result, ignoring unused bits
      if ((FDC.flags & SKIP_flag) && (FDC.result[RES_ST2] &= 0x40)) { // skip sector?
         if (FDC.command[CMD_R] != FDC.command[CMD_EOT]) { // continue looking?
            FDC.command[CMD_R] += FDC.command[CMD_STP]; // advance to next sector
            goto loop;
         }
         else { // no data to transfer -> no execution phase
            LOAD_RESULT_WITH_STATUS

            LOAD_RESULT_WITH_CHRN

            FDC.phase = RESULT_PHASE; // switch to result phase
         }
      }
      else { // sector data is to be transferred
         int sector_size;

         if (FDC.result[RES_ST2] &= 0x40) { // does the sector have an AM opposite of what we want?
            FDC.command[CMD_EOT] = FDC.command[CMD_R]; // execution ends on this sector
         }
         sector_size = 128 << FDC.command[CMD_N]; // determine number of bytes from N value
         FDC.buffer_count = sector_size; // init number of bytes to transfer
         FDC.buffer_ptr = sector->data; // pointer to sector data
         FDC.buffer_endptr = active_track->data + active_track->size; // pointer beyond end of track data
         FDC.flags &= ~SCANFAILED_flag; // reset scan failed flag
         FDC.result[RES_ST2] |= 0x08; // assume data matches: set Scan Equal Hit
         FDC.timeout = INITIAL_TIMEOUT;
         read_status_delay = 1;
      }
   }
   else { // sector not found
      FDC.result[RES_ST0] |= 0x40; // AT
      FDC.result[RES_ST1] |= 0x04; // No Data

      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



void fdc_write_data(byte val)
{
   int idx;

   #ifdef DEBUG_FDC
   if (FDC.phase == CMD_PHASE) {
      if (FDC.byte_count) {
         fprintf(pfoDebug, "%02x ", val);
      }
      else {
         fprintf(pfoDebug, "\n%02x: ", val);
      }
   }
   #endif

   switch (FDC.phase)
   {
      case CMD_PHASE: // in command phase?
         if (FDC.byte_count) { // receiving command parameters?
            FDC.command[FDC.byte_count++] = val; // copy to buffer
            if (FDC.byte_count == FDC.cmd_length) { // received all command bytes?
               FDC.byte_count = 0; // clear byte counter
               FDC.phase = EXEC_PHASE; // switch to execution phase
               FDC.cmd_handler();
            }
         }
         else { // first command byte received
            if (val & 0x20) { // skip DAM or DDAM?
               FDC.flags |= SKIP_flag; // DAM/DDAM will be skipped
               val &= ~0x20; // reset skip bit in command byte
            }
            else {
               FDC.flags &= ~SKIP_flag; // make sure skip inidicator is off
            }
            for (idx = 0; idx < MAX_CMD_COUNT; idx++) { // loop through all known FDC commands
               if (fdc_cmd_table[idx].cmd == val) { // do we have a match?
                  break;
               }
            }
            if (idx != MAX_CMD_COUNT) { // valid command received
               FDC.cmd_length = fdc_cmd_table[idx].cmd_length; // command length in bytes
               FDC.res_length = fdc_cmd_table[idx].res_length; // result length in bytes
               FDC.cmd_direction = fdc_cmd_table[idx].cmd_direction; // direction is CPU to FDC, or FDC to CPU
               FDC.cmd_handler = fdc_cmd_table[idx].cmd_handler; // pointer to command handler

               FDC.command[FDC.byte_count++] = val; // copy command code to buffer
               if (FDC.byte_count == FDC.cmd_length) { // already received all command bytes?
                  FDC.byte_count = 0; // clear byte counter
                  FDC.phase = EXEC_PHASE; // switch to execution phase
                  FDC.cmd_handler();
               }
            }
            else { // unknown command received
               FDC.result[0] = 0x80; // indicate invalid command
               FDC.res_length = 1;
               FDC.phase = RESULT_PHASE; // switch to result phase
            }
         }
         break;
      case EXEC_PHASE: // in execution phase?
         if (FDC.cmd_direction == CPU_TO_FDC) { // proper direction?
            FDC.timeout = OVERRUN_TIMEOUT;
            if ((FDC.flags & SCAN_flag)) { // processing any of the scan commands?
               if (val != 0xff) { // no comparison on CPU byte = 0xff
                  switch((FDC.command[CMD_CODE] & 0x1f))
                  {
                     case 0x51: // scan equal
                        if (val != *FDC.buffer_ptr) {
                           FDC.result[RES_ST2] &= 0xf7; // reset Scan Equal Hit
                           FDC.flags |= SCANFAILED_flag;
                        }
                        break;
                     case 0x59: // scan low or equal
                        if (val != *FDC.buffer_ptr) {
                           FDC.result[RES_ST2] &= 0xf7; // reset Scan Equal Hit
                        }
                        if (val > *FDC.buffer_ptr) {
                           FDC.flags |= SCANFAILED_flag;
                        }
                        break;
                     case 0x5d: // scan high or equal
                        if (val != *FDC.buffer_ptr) {
                           FDC.result[RES_ST2] &= 0xf7; // reset Scan Equal Hit
                        }
                        if (val < *FDC.buffer_ptr) {
                           FDC.flags |= SCANFAILED_flag;
                        }
                        break;
                  }
               }
               FDC.buffer_ptr++; // advance sector data pointer
            }
            else {
               *FDC.buffer_ptr++ = val; // write byte to sector
            }
            if (FDC.buffer_ptr > FDC.buffer_endptr) {
               FDC.buffer_ptr = active_track->data; // wrap around
            }
            if (--FDC.buffer_count == 0) { // processed all data?
               if ((FDC.flags & SCAN_flag)) { // processing any of the scan commands?
                  if ((FDC.flags & SCANFAILED_flag) && (FDC.command[CMD_R] != FDC.command[CMD_EOT])) {
                     FDC.command[CMD_R] += FDC.command[CMD_STP]; // advance to next sector
                     cmd_scan();
                  }
                  else {
                     if ((FDC.flags & SCANFAILED_flag)) {
                        FDC.result[RES_ST2] |= 0x04; // Scan Not Satisfied
                     }

                     LOAD_RESULT_WITH_CHRN

                     FDC.phase = RESULT_PHASE; // switch to result phase
                  }
               }
               else if (FDC.command[CMD_CODE] == 0x4d) { // write ID command?
                  dword sector_size, track_size;
                  byte *pbPtr, *pbDataPtr;

                  if (active_track->sectors != 0) { // track is formatted?
                     free(active_track->data); // dealloc memory for old track data
                  }
                  sector_size = 128 << FDC.command[CMD_C]; // determine number of bytes from N value
                  if (((sector_size + 62 + FDC.command[CMD_R]) * FDC.command[CMD_H]) > CPC.max_tracksize) { // track size exceeds maximum?
                     active_track->sectors = 0; // 'unformat' track
                  }
                  else {
                     int sector;

                     track_size = sector_size * FDC.command[CMD_H];
                     active_track->sectors = FDC.command[CMD_H];
                     active_track->data = (byte *)malloc(track_size); // attempt to allocate the required memory
                     pbDataPtr = active_track->data;
                     pbPtr = pbGPBuffer;
                     for (sector = 0; sector < FDC.command[CMD_H]; sector++) {
                        memcpy(active_track->sector[sector].CHRN, pbPtr, 4); // copy CHRN
                        memset(active_track->sector[sector].flags, 0, 2); // clear ST1 & ST2
                        active_track->sector[sector].data = pbDataPtr; // store pointer to sector data
                        pbDataPtr += sector_size;
                        pbPtr += 4;
                     }
                     memset(active_track->data, FDC.command[CMD_N], track_size); // fill track data with specified byte value
                  }
                  pbPtr = pbGPBuffer + ((FDC.command[CMD_H]-1) * 4); // pointer to the last CHRN passed to writeID
                  memcpy(&FDC.result[RES_C], pbPtr, 4); // copy sector's CHRN to result buffer
                  FDC.result[RES_N] = FDC.command[CMD_C]; // overwrite with the N value from the writeID command

                  active_drive->altered = 1; // indicate that the image has been modified
                  FDC.phase = RESULT_PHASE; // switch to result phase
               }
               else if (FDC.command[CMD_R] != FDC.command[CMD_EOT]) { // haven't reached End of Track?
                  FDC.command[CMD_R]++; // advance to next sector
                  cmd_write();
               }
               else {
                  active_drive->altered = 1; // indicate that the image has been modified

                  FDC.result[RES_ST0] |= 0x40; // AT
                  FDC.result[RES_ST1] |= 0x80; // End of Cylinder

                  LOAD_RESULT_WITH_CHRN

                  FDC.phase = RESULT_PHASE; // switch to result phase
               }
            }
         }
         break;
   }
}



byte fdc_read_status(void)
{
   byte val;

   val = 0x80; // data register ready
   if (FDC.phase == EXEC_PHASE) { // in execution phase?
      if (read_status_delay) {
         val = 0x10; // FDC is busy
         read_status_delay--;
      }
      else {
         val |= 0x30; // FDC is executing & busy
      }
      if (FDC.cmd_direction == FDC_TO_CPU) {
         val |= 0x40; // FDC is sending data to the CPU
      }
   }
   else if (FDC.phase == RESULT_PHASE) { // in result phase?
      val |= 0x50; // FDC is sending data to the CPU, and is busy
   }
   else { // in command phase
      if (FDC.byte_count) { // receiving command parameters?
         val |= 0x10; // FDC is busy
      }
   }
   return val;
}



byte fdc_read_data(void)
{
   byte val;

   val = 0xff; // default value
   switch (FDC.phase)
   {
      case EXEC_PHASE: // in execution phase?
         if (FDC.cmd_direction == FDC_TO_CPU) { // proper direction?
            FDC.timeout = OVERRUN_TIMEOUT;
            val = *FDC.buffer_ptr++; // read byte from current sector
            #ifdef DEBUG_FDC
            if (!(FDC.flags & OVERRUN_flag)) {
               dwBytesTransferred++;
            }
            #endif
            if (FDC.buffer_ptr >= FDC.buffer_endptr) {
               FDC.buffer_ptr = active_track->data; // wrap around
            }
            if (!(--FDC.buffer_count)) { // completed the data transfer?
               if (FDC.flags & RNDDE_flag) { // simulate random Data Errors?
// ***! random DE handling
               }
               active_drive->current_sector++; // increase sector index
               if (FDC.flags & OVERRUN_flag) { // overrun condition detected?
                  FDC.flags &= ~OVERRUN_flag;
                  FDC.result[RES_ST0] |= 0x40; // AT
                  FDC.result[RES_ST1] |= 0x10; // Overrun

                  LOAD_RESULT_WITH_CHRN

                  FDC.phase = RESULT_PHASE; // switch to result phase
               }
               else {
                  if (FDC.command[CMD_CODE] == 0x42) { // read track command?
                     if ((--FDC.command[CMD_EOT])) { // continue reading sectors?
                        if (active_drive->current_sector >= active_track->sectors) { // index beyond number of sectors for this track?
                           active_drive->current_sector = 0; // reset index
                        }
                        FDC.command[CMD_R]++; // advance to next sector
                        cmd_readtrk();
                     }
                     else {
                        LOAD_RESULT_WITH_STATUS

                        LOAD_RESULT_WITH_CHRN

                        FDC.phase = RESULT_PHASE; // switch to result phase
                     }
                  }
                  else { // normal read (deleted) data command
                     if (!((FDC.result[RES_ST1] & 0x31) || (FDC.result[RES_ST2] & 0x21))) { // no error bits set?
                        if (FDC.command[CMD_R] != FDC.command[CMD_EOT]) { // haven't reached End of Track?
                           FDC.command[CMD_R]++; // advance to next sector
                           cmd_read();
                        }
                        else {
                           LOAD_RESULT_WITH_STATUS

                           LOAD_RESULT_WITH_CHRN

                           FDC.phase = RESULT_PHASE; // switch to result phase
                        }
                     }
                     else {
                        LOAD_RESULT_WITH_STATUS

                        LOAD_RESULT_WITH_CHRN

                        FDC.phase = RESULT_PHASE; // switch to result phase
                     }
                  }
               }
            }
         }
         break;
      case RESULT_PHASE: // in result phase?
         val = FDC.result[FDC.byte_count++]; // copy value from buffer

         #ifdef DEBUG_FDC
         if (dwBytesTransferred) {
            fprintf(pfoDebug, "{%d} ", dwBytesTransferred);
            dwBytesTransferred = 0;
         }
         fprintf(pfoDebug, "[%02x] ", val);
         #endif

         if (FDC.byte_count == FDC.res_length) { // sent all result bytes?
            FDC.flags &= ~SCAN_flag; // reset scan command flag
            FDC.byte_count = 0; // clear byte counter
            FDC.phase = CMD_PHASE; // switch to command phase
            FDC.led = 0; // turn the drive LED off
         }
         break;
   }
   return val;
}



void fdc_specify(void)
{
   FDC.phase = CMD_PHASE; // switch back to command phase (fdc_specify has no result phase!)
}



void fdc_drvstat(void)
{
   byte val;

   check_unit(); // switch to target drive
   val = FDC.command[CMD_UNIT] & 7; // keep head and unit of command
   if ((active_drive->write_protected) || (active_drive->tracks == 0)) { // write protected, or disk missing?
      val |= 0x48; // set Write Protect + Two Sided (?)
   }
   if ((active_drive->tracks) && (FDC.motor)) {
      val |= 0x20; // set Ready
   }
   if (active_drive->current_track == 0) { // drive head is over track 0?
      val |= 0x10; // set Track 0
   }
   FDC.result[RES_ST0] = val;
   FDC.phase = RESULT_PHASE; // switch to result phase
}



void fdc_recalib(void)
{
   FDC.command[CMD_C] = 0; // seek to track 0
   fdc_seek();
}



void fdc_intstat(void)
{
   byte val;

   val = FDC.result[RES_ST0] & 0xf8; // clear Head Address and Unit bits
   if (FDC.flags & SEEKDRVA_flag) { // seek completed on drive A?
      val |= 0x20; // set Seek End
      FDC.flags &= ~(SEEKDRVA_flag | STATUSDRVA_flag); // clear seek done and status change flags
      FDC.result[RES_ST0] = val;
      FDC.result[RES_ST1] = driveA.current_track;
   }
   else if (FDC.flags & SEEKDRVB_flag) { // seek completed on drive B?
      val |= 0x21; // set Seek End
      FDC.flags &= ~(SEEKDRVB_flag | STATUSDRVB_flag); // clear seek done and status change flags
      FDC.result[RES_ST0] = val;
      FDC.result[RES_ST1] = driveB.current_track;
   }
   else if (FDC.flags & STATUSDRVA_flag) { // has the status of drive A changed?
      val = 0xc0; // status change
      if ((driveA.tracks == 0) || (!FDC.motor)) { // no DSK in the drive, or drive motor is turned off?
         val |= 0x08; // not ready
      }
      FDC.flags &= ~STATUSDRVA_flag; // clear status change flag
      FDC.result[RES_ST0] = val;
      FDC.result[RES_ST1] = driveA.current_track;
   }
   else if (FDC.flags & STATUSDRVB_flag) { // has the status of drive B changed?
      val = 0xc1; // status change
      if ((driveB.tracks == 0) || (!FDC.motor)) { // no DSK in the drive, or drive motor is turned off?
         val |= 0x08; // not ready
      }
      FDC.flags &= ~STATUSDRVB_flag; // clear status change flag
      FDC.result[RES_ST0] = val;
      FDC.result[RES_ST1] = driveB.current_track;
   }
   else {
      val = 0x80; // Invalid Command
      FDC.result[RES_ST0] = val;
      FDC.res_length = 1;
   }
   FDC.phase = RESULT_PHASE; // switch to result phase
}



void fdc_seek(void)
{
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_track = FDC.command[CMD_C];
      if (active_drive->current_track >= DSK_TRACKMAX) { // beyond valid range?
         active_drive->current_track = DSK_TRACKMAX-1; // limit to maximum
      }
   }
   FDC.flags |= (FDC.command[CMD_UNIT] & 1) ? SEEKDRVB_flag : SEEKDRVA_flag; // signal completion of seek operation
   FDC.phase = CMD_PHASE; // switch back to command phase (fdc_seek has no result phase!)
}



void fdc_readtrk(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_track->sectors != 0) { // track is formatted?
         FDC.command[CMD_R] = 1; // set sector ID to 1
         active_drive->current_sector = 0; // reset sector table index

         cmd_readtrk();
      }
      else { // unformatted track
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x01; // Missing AM

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
   }
   else { // drive was not ready
      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



void fdc_write(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_drive->write_protected) { // is write protect tab set?
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x02; // Not Writable

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
      else if (active_track->sectors != 0) { // track is formatted?
         cmd_write();
      }
      else { // unformatted track
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x01; // Missing AM

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
   }
   else { // drive was not ready
      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



void fdc_read(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_track->sectors != 0) { // track is formatted?
         cmd_read();
      }
      else { // unformatted track
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x01; // Missing AM

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
   }
   else { // drive was not ready
      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



void fdc_readID(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_track->sectors != 0) { // track is formatted?
         dword idx;

         idx = active_drive->current_sector; // get the active sector index
         if (idx >= active_track->sectors) { // index beyond number of sectors for this track?
            idx = 0; // reset index
         }
         memcpy(&FDC.result[RES_C], &active_track->sector[idx].CHRN, 4); // copy sector's CHRN to result buffer
         active_drive->current_sector = idx + 1; // update sector table index for active drive
      }
      else { // unformatted track
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x01; // Missing AM

         LOAD_RESULT_WITH_CHRN
      }
   }
   FDC.phase = RESULT_PHASE; // switch to result phase
}



void fdc_writeID(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_drive->write_protected) { // is write protect tab set?
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x02; // Not Writable

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
      else {
         FDC.buffer_count = FDC.command[CMD_H] << 2; // number of sectors * 4 = number of bytes still outstanding
         FDC.buffer_ptr = pbGPBuffer; // buffer to temporarily hold the track format
         FDC.buffer_endptr = pbGPBuffer + FDC.buffer_count;
         FDC.timeout = INITIAL_TIMEOUT;
         read_status_delay = 1;
      }
   }
   else { // drive was not ready
      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}



void fdc_scan(void)
{
   FDC.led = 1; // turn the drive LED on
   check_unit(); // switch to target drive
   if (init_status_regs() == 0) { // drive Ready?
      active_drive->current_side = (FDC.command[CMD_UNIT] & 4) >> 2; // extract target side
      dword side = active_drive->sides ? active_drive->current_side : 0; // single sided drives only acccess side 1
      if ((active_drive->flipped)) { // did the user request to access the "other" side?
         side = side ? 0 : 1; // reverse the side to access
      }
      active_track = &active_drive->track[active_drive->current_track][side];
      if (active_track->sectors != 0) { // track is formatted?
         if (FDC.command[CMD_STP] > 2) {
            FDC.command[CMD_STP] = 2; // step can only be 1 or 2
         }
         FDC.flags |= SCAN_flag; // scan command active
         cmd_scan();
      }
      else { // unformatted track
         FDC.result[RES_ST0] |= 0x40; // AT
         FDC.result[RES_ST1] |= 0x01; // Missing AM

         LOAD_RESULT_WITH_CHRN

         FDC.phase = RESULT_PHASE; // switch to result phase
      }
   }
   else { // drive was not ready
      LOAD_RESULT_WITH_CHRN

      FDC.phase = RESULT_PHASE; // switch to result phase
   }
}